MaxxECU SPORT (Basic, Standard or Premium)
All MaxxECU's products use the same, easy to use, but very powerful MTune software. Dig deep or keep it simple.
All features are unlocked and available on every ECU.
MaxxECU SPORT Pinout & Diagram
Selected Features:
- E-Throttle
- Built-in wideband lambda
- Traction control
- Anti-lag
- Shift-cut and launch
- Variable valve control
- Flex fuel
- CAN bus
- 1,000 Hz logging on 118 channels
- 6 injector output (high/low impedance)
- 6 ignition outputs
- 7 extra (GND) outputs
- 2 extra outputs for E-Throttle
- 6 extra analogue inputs
- Bluetooth connection to MDash on your Android phone or tablet Download MDash on Google Play
Target engines for MaxxECU SPORT:
- All 1-12 cylinder engines (2/4-stroke)
- Up to 6 cylinders fully sequentially
- Up to 12 cylinders in wasted spark
- MaxxECU SPORT inputs
- Intake air temperature sensor (IAT)
- Coolant temperature sensor (CLT)
- Throttle position sensor (TPS)
- Lambda (WBO) sensor. Uses a sensor directly connected to the ECU without any additional electronics. Supports Bosch LSU 4.2 and 4.9
- 2 trigger inputs. VR or digital. Automatic trigger level detection. The signals are processed by a completely separated processor for maximum performance and immunity against interference
- 2 extra temperature sensors. Can be used as switches or to control additional functions
- 6 extra 0-5V inputs. Can be used for additional sensors such as measurement oil/fuel pressure
- 2 digital inputs used for example for speed sensors (Hall) or switches
- Built-in 400kPa MAP-sensor for up to 3bar/43PSI of boost
MaxxECU SPORT outputs:
- 6 peak/hold injector outputs. 1-2 high or low impedance injectors per output. 8A per output
- 6 ignition outputs. 5V signal to drive ignition modules, CDI units or coils
- 7 outputs for extra features. Can be used to control virtually anything. Fuel pumps, idle control, boost solenoids, nitrous, shift lights, fans, warning lights, etc. GPO 1-5 (2A), GPO 8 (5A), GPO 9 (2A)
- 2 extra motor outputs (e.g E-Throttle). GPO 11,12 (2A)
- MaxxECU SPORT technical
- CAN bus for expansion modules, OEM vehicle CAN, OBDII
- USB communication for tuning with MTune
- Bluetooth for connecting to mobile devices with MDash
- 8MB memory for internal logging, up to 1000Hz
- Supply voltage 8-22V
- ARM Cortex-M3 120MHz main processor
- Resolution on ignition: 0.1 degrees
- Resolution on injectors: 0.001 ms
- Updates the fuel and ignition calculations 2000 times per second
- The fastest PC communication on the market
- Weight: 590g
- 140x134x42mm (including mounting points, excluding connector)
- Aluminium casing
See the MaxxECU website for complete feature list.
Grab one of our 3D Printed Dummy MaxxECU Modules to visualise your installation.
